Regency Logo

Regency Generators Knowledge Base

Enabling an Audible Alarm Prior to Starting on a Deep Sea Electronics Control Panel

To modify this setting on your DSE Control module you will need to download the Deep Sea Electronics Configuration Suite, which can be obtained from their website.

This is a simple setting that can be enabled to sound a warning alarm that the Diesel Generator is about to run. This alarm is sounded while the pre-start sequence is taking place.

This setting may be used to meet the requirements of the site where the Diesel Generator is installed.

The Audible Alarm Prior to Starting option is found in the Miscellaneous Options within the Module section of the Configuration Suite. You can see below where this is located.

DSE_Configuration_Suite_Alarm_Prior_To_Starting.jpg