The RSC-HMU Controllis Controller is a custom controller designed for use on DC variable speed generators for Telecoms use. Made up of 4 control boards housed in a rugged metal case. The controller nominally takes a 12V supply voltage of approximately 0.5A (6W). Below is an image of the controller after the booting up.
For working on the RSC-HMU Controller we would recommend making sure you have the recommended list of tools.
There are also a number of guides to the controller and its functions which are useful.
Management of the RSC-HMU Controller
After connecting to the RSC-HMU via ethernet, the controller can be configured and monitored using web interfaces. The three main web interfaces are:
|RSC-HMU Controller Console||Main Configuration and Monitoring Page|
|RSC-HMU Commissioner Page||Sensor Configuration and Setup|
|RSC-HMU Telemetry Web Page||Controller Monitoring Live|
Remote Management Of RSC-HMU Controller
The controller can be managed online using a Remote Management Server (RMS). The remote management server can be used to update, monitor and upgrade the controller.
To connect the controller to the RMS, follow the guide Setting Up RSC-HMU Connection to Controllis Management Server.
GPS Connection of RSC-HMU Controller
The controller has built in GPS. To set up the GPS Connection, follow the guide Connecting the RSC-HMU Controller to GPS.
Troubleshooting the RSC-HMU Controller
For troubleshooting, see the page Troubleshooting the RSC-HMU Controller